PR3 MK3 BIKE SPEC FROM £2599.99

 

ENGINE

 

TYPE - YX140

GEARS -N-1-2-3-4

COOLING - OIL COOLED

FLYWHEEL - FULLY ADJUSTABLE RACE FLYWHEEL

CAMSHAFT - Z40 CAM & SPRINGS

OIL SPINNER - STAINLESS STEEL 1 PIECE RACE SPINNER

SUMP PLUG - CNC DRILLED MAGNETIC PLUG & LOCKWIRED

OIL COOLER - TWIN HIGH FLOW COOLERS WITH BRAIDED HEL PERFORMANCE HOSES

 

ELECTRICS

CDI - RACE MAP DIGITAL CDI

PLUG CAP (NEW) - WATERPROOF SPARK PLUG CAP

 

EXHAUST

 

PIPE - HIGH FLOW CUSTOM MADE STAINLESS STEEL DOWN PIPE

CAN (NEW) - PRO CORE T1.2 CAN WITH REMOVABLE BAFFLE

 

SUSPENSION

 

FRONT FORKS - FULLY ADJUSTABLE SP FORKS REWORKED & BY PARKER RACING. CNC TOP CAPS ANODISED RED(735MM)

REAR SHOCK - DNM MT-RC HORNET FULLY ADJUSTABLE (295mm)

REAR SPRING WEIGHT - 1200LB (CHOICE OF)

 

FRAME & CONTROLS

   

FRAME - HYBRID COMBINATION CRF110,CRF70,TTR

SWING ARM (NEW) - ALUMINIUM WITH CNC RISER BLOCK, NEW REMOVABLE RIDE HEIGHT PLATE & SHOCK ANGLE & AXLE UPGRADE

TRIPPLE CLAMPS - CNC MADE ANODISED RED

FOOTPEGS - RACE STYLE PEGS WITH ADJUSTABLE CNC BLOCKS (8 SETTINGS)

GEAR LEVER - EXTRA SHORT CNC LEVER TO SUIT FOOT PEGS

BARS - GENUINE PROTAPER CARL MICHAEL FAT BARS

HANDGUARDS - STANDARD WRAP AROUND

AXELS - DRILLED FOR BOBBINS

AXEL BOBBINS - CNC MADE BOBBINS

BAR BOBBINS - CNC MADE BOBBINS

GRIPS - STANDARD SOFT GRIPS

AXEL BLOCKS - CUSTOM MADE TO PARKER RACING CNC SUPERMOTO AXEL BLOCKS WITH CRASH BOBBINS

BRAKE FRONT - CUSTOM MADE FULL GENUINE BREMBO  TWIN POT BRAKE CALIPER AND MASTER CYLINDER WITH OVERSIZED 12mm PISTON COMPLETE WITH RACE FLUID, HEL PERFORMANCE HOSE, RACE PADS

REAR CALIPER - SINGLE POT CALIPER WITH BRAIDED HOSE

REAR LEVER (NEW) - HAS BUILT IN INTERGRATED CRASH BOBBIN DESIGN AND CNC PEDAL TIP

FRONT DISK - CUSTOM MADE PARKER RACING FLOATING 220mm WAVEY DISK

REAR DISK - 190mm WAVEY DISK

THROTTLE - QUICK ACTION 1/4 TURN

TANK PROTECTORS (NEW) - FRAME MOUNTED FUEL TANK PROTECTOR BOBBINS

HAND CONTROLS (NEW) - IGP FOLDING CLUTCH LEAVER CNC MADE WITH ADJUSTABLE REACH, SHORT ALLUMINIUM GEAR LEVER WITH REACH ADJUSTER

 

TYRES & WHEELS

FRONT WHEEL - MAG 2.15 X 12 INCH

REAR WHEEL - MAG 2.5 X 12 INCH

VALVES - CNC ANGLED

DISK BOLTS (NEW) - UPGRADED STAINLESS STEEL BOLTS

BEARINGS (NEW) - UPGRADED SKF BEARINGS FITTED

TYRES - CHOICE OF PMT TYRES

 

 

FUELING

 

CARBURETTOR - GENUINE MIKUNI VM26 CARB

AIR FILTER - FOAM

CABLE - RED CABLE

 

RUNNING GEAR

 

FRONT SPROCKET - STEEL 16T 420P

REAR SPROCKET - STEEL 39T 420P

CHAIN - UPGRADED RENTHAL R1 CHAIN

 

MISC

 

ALLOY CATCH TRAY

EXTRA LONG CARB OVER FLOW PIPES & CLIPS

EXTRA LONG ENGINE BREATHER PIPE

 

PLASTICS AND SEAT

PLASTICS - UNIQUE CUSTOM PLASTIC SET WITH SHORT SUPERMOTO FRONT FENDER AND NUMBER BOARD

SEAT - UPGRADED LEATHER GRIPPER SEAT

GRAPHICS - CUSTOM GRAPHICS KIT WITH NAME AND NUMBER

 

MEASSUREMENTS

WHEEL BASE - 1200MM

SEAT HEIGHT - 830MM

BAR HEIGHT - 1020MM

BAR WIDTH - 800MM (CAN BE REDUCED)

 

BOLTS

 

(NEW) - ALL BOLTS HAVE BEEN UPGRADED TO STAINLESS STEEL DIN912 A2 ST GRADE BOLTS

 

DYNO

(NEW) - ALL OUR BIKES WILL BE SET UP ON OUR DYNO AND TESTED BEFORE DISPATCH. CUSTOMER WILL ALSO GET PRINT OUT

PLEASE NOTE PHOTOS DISPLAYED ARE OF TOP SPEC MODLE WITH THE FOLLOWING UPGRADES:

DNM FRONT SUSPENSION FORKS

CNC QUICK ACTION RACE THROTTLE

PRO TAPER BAR GRIPS

TYPE R ENGINE UPGRADE

EXHAUST PROTECTOR STRAP

TALON SPROCKETS

OPTIONAL UPGRADES

 

CNC RED TAPPET COVERS - £9.99

PROBOLT ENGINE BOLT UPGRADE - £59.99

STAINLESS STEEL ENGINE BOLT UPGRADE - £9.99

RACE CNC THROTTLE - £39.99

CNC TYRE VALVES (FOR SPARE WHEELS) - £7.99

TALON FRONT SPROCKET - £9.99

TALON REAR SPROCKET - £17.99

PRO TAPER GRIPS - £9.99

SPARE WHEELS (WITH SKF BEARINGS) - £129.99

WHEELS WITH STD DISKS & STD BOLTS & SKF BEARINGS - £144.99

WHEELS WITH FLOATING FRONT DISK AND STD REAR, UPGRADED BEARINGS & SS DISK BOLTS - £209.99

3X FRONT STEEL SPROCKETS- 14,15,17 - £14.99

3X REAR STEEL SPROCKETS - 35,37,39 - £19.99

3X TALON FRONT SPROCKETS - 15,16,17 - £27.99

3X TALON REAR SPROCKETS - 37,39,41 - £49.99

EXHAUST PROTECTOR - £5.00

SUSPENSION - DNM HORNET FORKS & SET UP WITH OIL AND PRELOAD SPACERS - £280.00

TYPE R ENGINE UPGRADE - £200.00

YX160 UPGRADE - £100.00